# Sunlight study for architects in 10 minutes

> Run a sunlight study (bezonningsonderzoek) per project in 10 minutes, not 10 days. €49 per report, no subscription. TNO Light & Strict plus municipal norms.

Canonical: https://schaduwplan.nl/en/voor-architecten/
Last updated: 2026-11-17

For architects & building designers

## A sunlight study in 10 minutes. Instead of 10 days.

Stop outsourcing sunlight studies. Do it yourself for your clients — tested against the TNO Light and Strict norms and the Hague and Rotterdam three-step norm. A one-time €49 per report.

Plan on about 10 minutes per design iteration.

[Try it with a current project](https://schaduwplan.nl/en/app/)[View the pricing](https://schaduwplan.nl/en/prijzen/)

No subscription. No minimum purchase. €49 per report.

Firm standard

€49 per report

TNO Light + Strict norm, The Hague + Rotterdam three-step norm, before/after comparison and source attribution on the cover and in the sources appendix.

Turnaround

~10 min

External firm

3-15 days

Schaduwplan price

€49

Firm price

from €400

Why Schaduwplan

## Three reasons to keep it in-house.

Outsourcing costs you time, margin, and control over your design. With Schaduwplan, you keep all three.

01

Time saved

### 10 minutes per project

No brief to a firm, no further iterations over email, no waiting. You run the analysis while the client sits with you at the table.

02

Margin

### Keep it in-house

Where you now hire an agency from €400 per project, you pay €49 per report. That is margin that stays with you.

03

Control

### Iterate as you design

Adjust height, shape, or orientation and see right away what it does to the sunlight. No waiting on an external firm.

The source data

## No guesswork. Government sources.

The same data layers a traditional firm would pull — only without the licence costs or the wait time.

3DBAG

TU Delft + 3DGI

LoD2 building models with roof surfaces, updated each quarter.

AHN (4/5/6)

PDOK + Ellipsis Drive

Actueel Hoogtebestand Nederland (the national elevation dataset) — lidar accurate to a few centimetres. AHN4 (2020–2022) nationwide; AHN5/AHN6 are being rolled out per province.

BAG

Kadaster / PDOK

Addresses and building metadata from the authoritative registry.

PDOK Locatieserver

PDOK

Address autocomplete with disambiguation by street and postcode.

From project to attachment

## How a sunlight study fits into your workflow.

Works independently of your CAD tool. Want to run it alongside SketchUp, Archicad, or Revit? You can — we deliver only what the municipality (gemeente) asks for.

1. 01
   ### Start a project from an address
   Type an address or coordinates. We load the surroundings and the target building automatically from 3DBAG, and check right away whether the omgevingsplan publishes a building plot with its dimensions as data there.
2. 02
   ### Sketch or import your design
   Drag volumes, roof types, recessed facades. Faster than in SketchUp for the single-volume check the municipality wants to see.
3. 03
   ### Test against the relevant norms
   TNO Light and Strict plus the Hague and Rotterdam three-step norm — calculated at the same time. You see right away which norm your client meets or misses.
4. 04
   ### Export the PDF
   A sunlight report with north arrow, scale, before/after comparison, and source attribution. Usable directly as an attachment to your permit application.

A second signal

## Daylight context alongside the sunlight check.

A quick signal of whether a design removes skylight — before the formal daylight calculation, and as a second line of support toward the municipality (gemeente) or neighbours.

Alongside sun hours, Schaduwplan shows a sky-view indication (Vertical Sky Component) per window: how much sky a window still sees from the outside, before and after the design. Useful as an early signal in the sketch phase, and as a second line of support — under Article 5:37 of the Dutch Civil Code, the court weighs daylight too, not just sun.

It is explicitly not a replacement for the formal daylight calculation. The interior daylight factor (NEN-EN 17037) or the equivalent daylight area (NEN 2057) remains a separate building-physics exercise during design; the sky-view is an exterior measure and a quick first indication. For the statutory daylight requirement, your building-physics consultant provides the definitive figure.

Report

€49 per report, one-time

One report per project. No subscription, no minimum purchase, no monthly quota.

- TNO Light + Strict norm
- The Hague + Rotterdam three-step norm
- Before/after comparison per measurement point
- North arrow, scale, and source attribution
- PDF usable directly as an attachment

[Start a project](https://schaduwplan.nl/en/app/)[View the pricing](https://schaduwplan.nl/en/prijzen/)

Questions from firms

## On workflow, norms, and project size.

[Go to the full FAQ](https://schaduwplan.nl/en/faq/)

### Does it work alongside SketchUp / Archicad / Revit?

Yes. We focus specifically on the sunlight study as a separate output for the environmental permit (omgevingsvergunning). Your design stays in your CAD tool; we deliver only the sunlight part the municipality wants to see. Drop the PDF into your existing project folder.

### Which norms are included?

The TNO Light and Strict norms plus the Hague and Rotterdam three-step norm. Eindhoven, Amstelveen, and Krimpen aan den IJssel follow shortly. Missing one you use often? Email us — we will build it in.

### Can I compare against what the zoning plan already permits?

Yes, as a comparison alongside the standards test. Once the address is set, Schaduwplan consults the omgevingsplan (Ruimtelijke Plannen API). Where the municipality publishes a building plot with a maximum eave and ridge height as data, the permitted volume appears under Layers and you confirm or correct every value; the paid report puts the existing, the requested and the permitted situation side by side per measurement point, with the plan ID and retrieval date per value. Where the plan is not published digitally — with older plans the building plot exists only on the plan map — the layer stays away and you take the dimensions over yourself; that says nothing about what may be built there. Two limits remain: we do not derive the envelope from the planning rules, that legal interpretation stays with you as the architect, and permit-free building (Bbl and bruidsschat), in-plan deviation powers and custom rules are not included in it, so the envelope does not show the complete permitted building volume. The comparison is usable as evidence alongside the standards test, not as a pass/fail verdict of its own.

### Can I get a demo?

The simplest demo is this: open the 3D viewer on one of your current projects and run a scenario. If it does not work or you want feedback, email hello@schaduwplan.nl — we will do a screen share the same day.

### Can I also calculate larger residential projects?

Schaduwplan covers the single-volume use cases that make up the vast majority of residential projects — extensions, roof additions, annexes, and detached sheds. For projects with many volumes and pitched roofs from DWG, more complex modelling is on the roadmap. Call us if that comes up.

## Related

- [Nederlandse versie](https://schaduwplan.nl/voor-architecten/)
